machines: barrels
PEM "Full Flow" Out of Balance Rotary Barrel

Rugged steel construction,
optimum finishing performance,
3 dimensional action,
30% more efficient than the standard rotary barrel, polyurethane or rubber lining,
free standing design,
main unload door,
small rinse / inspection door with insert screen for rinsing,
unload chute with gate,
on/off isolator or full gear timer,
supplied with guard,
3 phase 415 volt 50Hz motor,
Guarded transmission mechanism,
Low noise emission (acoustic cabin can be fitted).
Machine Capacity (Litres) Load (kg) Rubber Thickness (mm) Internal Dimensions L x A/F Motor (kw) Speed (r.p.m.) Overall L x W x H (mm) Discharge Height (mm) Machine Weight
92 125 8 430 x 460 0.75 32 1060 x 1080 x 1250 250 335
137 186 8 530 x 510 0.75 30 1180 x 1150 x 1335 250 385
193 260 8 600 x 555 1.5 27 1260 x 1230 x 1410 250 500
670 910 16 1024 x 820 3.75 18 1920 x 1700 x 1920 250 1295


18 CU FT Rotary Barrel Finishing Machine

Features: Machine consists of a frame mounted octagonal rotating barrel, lined with a high abrasion resistant rubber.
The drive system consists of a 2 kW, 415V three phase, adjustable speed motor. The barrel speed is factory set at 28 - 3- RPM but can be manually adjusted from 10- 60 RPM.

Controls: Isolator, Optical 'Power On' indicator, Start & Stop switches, Inch button, Six hour elapsed time process timer, Manual/ Auto switch.

Safety: The horizontally hinged folding safety doors operate an electric position switch linked to a brake mounted on the driven side of the transmission unit, such that the machine is incapable of operation with the safety door open.